Rodeo Talk about Isuzu Rodeo related topics here...

turning off the horn

Old Oct 2, 2007 | 07:20 PM
  #1  
cws4x4's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2007
Posts: 4
From: United States
Default

i just purched a 1999 rodeo and really like the truck, but how do i turn off the horn when the alarm is turned on or off?
 
Old Oct 2, 2007 | 07:27 PM
  #2  
Gizmo42's Avatar
Senior Member
Joined: Jan 2006
Posts: 525
From: United States
Default

If you have an owners manual its in there. If you dont have one I will look it up and post tomorrow. Dont have my manual here at the moment.
 
Old Oct 3, 2007 | 05:53 AM
  #3  
cws4x4's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2007
Posts: 4
From: United States
Default

The manual only showes how to turn it on. I tried the three door lock two close,three more locks, one close nothing happens. What am I missing in the setup? Thanks for your help.
 
Old Oct 3, 2007 | 05:40 PM
  #4  
Gizmo42's Avatar
Senior Member
Joined: Jan 2006
Posts: 525
From: United States
Default

Its the same procedure for turning it on or off. If its already on, doing the procedure should turn it off. Sometimes it takes a few tries to get it. I've done it a couple times on mine, took several tries.
 
Old Oct 3, 2007 | 06:46 PM
  #5  
cws4x4's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2007
Posts: 4
From: United States
Default

thanks i will keep tring
 
Old Oct 4, 2007 | 06:09 PM
  #6  
cws4x4's Avatar
Thread Starter
|
Junior Member
Joined: Oct 2007
Posts: 4
From: United States
Default

OK i tried 10 times nothing happens!! am i supposed to get a
response from the door lock or what? I am locking the door 3 times shut
it twice lock 3 more times then shut and open the door again. What am i
missing?
 
Old Oct 4, 2007 | 07:19 PM
  #7  
Gizmo42's Avatar
Senior Member
Joined: Jan 2006
Posts: 525
From: United States
Default

Sounds like you are doing it right as long as you are doing the lock/unlock within 10 seconds and the close/open as fast as you can.

I just did it on mine. Half the time it worked. When it works the door will lock then unlock once. The manual says if it fails it should lock/unlock 3 times but when it failed on mine it did nothing.

Start with the door unlocked and closed for a minute or so, then open it and do the procedure. I know it works on mine atleast [img]smileys/smiley8.gif[/img]

 
Old Oct 7, 2007 | 02:36 PM
  #8  
TCool's Avatar
Junior Member
Joined: Sep 2007
Posts: 24
From: United States
Default



Are you guys talking about being able to turn the horn off when you lock/unlock the doors with the keyless entry? I kinda find the horn on this thing to be somewhat annoying, so if you can make it stop beeping when you lock/unlock the door I wanna do it.


If i'm right, could you lay the steps out for me. If I'm not right, well then ignore my stupidity. [img]smileys/smiley4.gif[/img]
 
Old Oct 7, 2007 | 05:08 PM
  #9  
Gizmo42's Avatar
Senior Member
Joined: Jan 2006
Posts: 525
From: United States
Default


Yep thats what we are talking about.

1. Drivers door open.
2. Insert the key into the driver's door key cylinder, and turn to lock and unlock 3 times (lock -> unlock -> lock -> unlock -> lock -> unlock) within 10 seconds.
3. Close and Open the door 2 times (close -> open -> close -> open) within a 10 second period.
4. Turn the key to lock and unlock 3 times (lock -> unlock -> lock -> unlock -> lock -> unlock) within 10 seconds again.
5. Close and Open the door.
Response of door lock motor (Lock, Unlock once if successful. Lock, Unlock 3 times if fail).

I have mine on but I replaced the horn with an 'american' style horn so it doesnt sound so goofy.

Edited by: Gizmo42
 
Old Oct 7, 2007 | 07:53 PM
  #10  
TCool's Avatar
Junior Member
Joined: Sep 2007
Posts: 24
From: United States
Default



Awesome! Thanks.


I was actually thinking of replacing the horn on mine also.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jstar41
Amigo
4
Apr 9, 2014 12:09 AM
surfbob
Rodeo
2
Apr 19, 2011 06:32 AM
mmarx
Trooper
0
Apr 5, 2008 10:11 PM
rcsen
General Tech
0
Feb 5, 2008 01:40 PM
trooper
Trooper
2
Jan 26, 2006 10:55 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:04 AM.