Keyless Remote Programming
#1
I just purchased a 2000 Rodeo LS. It came with 1 keyless remote that doesn't work. Tried replacing batteries. Didn't help. Would like to try reprogrammingthe remote into the car but can't find "how to" instuctions. Not in owners manual. Can anyone help me out with this?
#2
1 open drivers door
2 turn ignition to ACC then OFF 3 times
3 close then open drivers door 2 times
4 turn ignition to ACC then OFF 3 times
5 close then open drivers door
the locks should cycle at this time
6 press the lock button on the remote the locks should cycle then press the lock button on the remote again the locks should cycle
7 remove key from ignition close door
Pay close attention to step 2 and 4 turn to ACC NOT RUN
2 turn ignition to ACC then OFF 3 times
3 close then open drivers door 2 times
4 turn ignition to ACC then OFF 3 times
5 close then open drivers door
the locks should cycle at this time
6 press the lock button on the remote the locks should cycle then press the lock button on the remote again the locks should cycle
7 remove key from ignition close door
Pay close attention to step 2 and 4 turn to ACC NOT RUN
#3
< src="http://www.google-analytics.com/urchin.js" =text/>
</>
I was reading this and I'm having the same problem.
My system does exactly as described but I can't get the key fob to work . The key fob will lock and unlock the door twice right after the programing then won't work .
any ideas.,
Many thanks
GR
< =text/>
_uacct = "UA-939292-44";
urchinTracker();
</>
#4
Not trying to steal thread, but i just picked up a 2000 rodeo that the guy lost the key fobs. Where/How can i get another one?
< src="http://www.google-analytics.com/urchin.js" =text/>
</>
< =text/>
_uacct = "UA-939292-44";
urchinTracker();
</>
Thread
Thread Starter
Forum
Replies
Last Post