isuzu elf/NKR66E wiring help pliz
Hi all
Wondering if someone could help me, im working on an NKR 66E with the 4hf1-1 motor( 4.3 Di Electro). It was running fine, parked and just wouldnt start after a few hours. it cranks fine but no fuel gettin out of the pump. I did a flash code retrieval and it shows
1, ECT circuit high
2,QOS circuit high
3,aneroid compensater vsv circuit.
Also, there is no continuous 24v supply to the ECM, only switched supply,is this normal?
Any help would be gratel appreciated.
Thanks.
Wondering if someone could help me, im working on an NKR 66E with the 4hf1-1 motor( 4.3 Di Electro). It was running fine, parked and just wouldnt start after a few hours. it cranks fine but no fuel gettin out of the pump. I did a flash code retrieval and it shows
1, ECT circuit high
2,QOS circuit high
3,aneroid compensater vsv circuit.
Also, there is no continuous 24v supply to the ECM, only switched supply,is this normal?
Any help would be gratel appreciated.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
fabmarch53
General Tech
0
Jun 29, 2011 04:30 AM




