Parting out first gen Troopers
 

Hey all, I've got a handful of old Troopers that I'm going to be parting out, let me know if there's anything you're needing. Thanks Johnny (512)299-3878

hi i was wondering what years are first generation troopers? i have an 89, please let me know, thanks

Chris

I've got several years including a few '89s

I have a 89 trooper as well. I need a driver side headlight assembly. mine is all rusted out. do you have any? if you do, email me pics and prices at gearhead899@aim.com. thanks :)

Do you have any 2.8 V6 engines for a 91 Trooper that will fit a 4x4 5 speed?

Thanks,

Mark

What would you charge for 1986 pass. side fender, hood, and grill?

Do you have any 4ze1 heads - complete? What is the casting series for them? How much are you looking to get for each one?

I do have some heads but do not know what the casting numbers are off the top of my head. If you tell me what you're looking for I'll check and see if I have any. I'd want $100 for one.

Thanks for getting back to me so quickly.:)

On the rear of the head, the distributor side, is a number - 1, 2, 3 or a 4. These are the generations of the castings. This number is stand alone and should be below where it says 4ze1. I would like to get a 3 or 4. Let me know what you have.

For the $100, what comes with the head? Valves, cam, head bolts, gear, etc.?

Ok, I looked at one of the heads that is off the car and it said:
6
4ZE1/C1
just like that across the back. All the others are still in the engine bay and I can't get to the back to read htem.

Happy New Year! I hope you had a great holiday and wish you well in 2011!


Have you had an opportunity to see what others you may have? How much do you figure the shipping will be to 87004? What parts will come with the head? I've got a 4ze1 that had a mechanic put the cam timing out 90 degrees and a lot of the valves are bent. Besides, I would like to have the original cam shaft that was part of the head continue. I need some head bolts and was wondering if those will also be included with the head. Let me know.

The only way for me to check them would be to pull them off.

Can you give me an idea what is included in the head that you have off? Can you let mew know how much the shipping would be to 87004? Is the head and valves in good shape - no cracks or bent valves? Do the ca lobes look good - no groves, cracks or evidence of lack of oil? Do you have the head bolts? valve cover? timing gear?

Whatever information you can provide would be much appreciated.

The head that I have off had jumped time and has several bent valves and broken rocker arms. I have other heads, lots of head bolts, cams, rockers, etc I could put a head together but do not have one loose in hand ready to bolt on. I personally would recommend taking ANY head to the machine shop to have it checked and/or resurfaced, valve job, etc

Yes, I agree. However, I would like to bring the machine shop the best one that I can to let them make it better. In other words, I would hate to bring them a head with the types of problems you mentioned. I am looking for a later head with a casting number of 3 or 4 and straight valves and rockers. That way, I put the best foot forward sort of speak and the machine shop can only make it top notch.

I realize that many engines are still in the car and I am in no hurry. However, if you have a chance to look and see what you have, then I need a 4ze1 complete head. I am looking at the time horizon of 1 or 2 months to be able to get this car back in the mountains. Perhaps you will have an opportunity to find a cylinder head in a couple/few weeks. Keep me posted, please.

Do you have a trailer hitch for an 89 Trooper? I could also use the parking brake set up, handle, cable, etc. Thanks
Michael

Chyer, It's been in the 10 to 15 degree range lately, so I haven't really been in the "head pulling" mood... I really don't go around and just pull heads to see if they're any good or not. When it warms up a bit, if you want to Paypal me the money I will go pull what I have and send you the best one. Otherwise it really doesn't make sense for me to tear a bunch f motors apart on a maybe...
MikeS, I have an '89 auto that I just got recently that has the whole set up. I haven't looked into it very closely, but it should be in pretty good shape, overall the Trooper is pretty nice. Like I said above I've got snow on the ground right now so if you don't mind waiting a little I'd rather not pull that stuff right now... well, unless you need it right this instant and are willing to pay enough to make me work outside in the snow ;-) I don't have a hitch that's not being used, sorry.

Not a problem. Just give me all the details. Let me know what I'm sending you money for - I know it's a cylinder head, but include that on the invoice and whatever parts and the shipping costs . Also,give me an estimate of when you think it possible to go out and get one. Thanks!

I need the electric motor only of the power window, left rear door of a 1989 trooper. Do you have it???

Hey Johnny, I have an '88 five speed that was missing the center console when I got it. The previous owner put in one of those Wal-Mart jobs and it doesn't fit very well. Do you have any complete, gray consoles? If so, how much shipped w/ all it's fasteners?
Zip is 98826. Can you get pics?

Redcentinela, I don't have any power window stuff, sorry. Jeffs_62 I do have a grey center console, if you want to send me your regular email address I'll send you some pictures. It's pretty big so with shipping included you're probably looking at about $50

That sounds fair. I will PM you my e-dress.

Thanks Johnny for your response.

I have a 90 Trooper and could use the drivers front seat belt assembly. I don't need the part that is bolted next to the console....just the side that's bolted to the door pillar. I have the grey interior by the way.

Thanks for the quick delivery of the seat belt. It's installed and working good as new again..... thats if my dog won't chew on this one....lol

Ignition
 

Hi Johnny, I need a power transistor for an '89 Trooper with the 2.6L 4cyl engine. Any chance you would have one?

Looking for the quarter window hinge assembly (including the bolt through the glass) for 91 trooper (driver side). Do you still have any? How much?

I've picked up several more Troopers over the last couple months, send me a message if you need anything. Thanks

Fuel tank
 

I need a fuel tank for an 85 trooper. I believe they will fit through 91 but I'll have to make sure about that. I'll check here or you can e mail at aknctn@mound.net with any details. Thanks

I need the upper caliper pivot pin for an '88 front brake caliper.

BTW the console and glove box door were perfect. Thanx.

I don't need the part that is bolted next to the console....just the side that's bolted to the door pillar. I have the grey interior by the way.

need 1991 headlight
 

I need a passenger side headlight assembly for my 1991 Trooper. If you have one can you please send a photo and your asking price? Thanks

distributor wanted
 

hey there johny5five im looking for a distributor for 87 carb trooper