98-02 Passport/Rodeo Sending Unit
 

Hi guys, So i need some info... Im working on a 98 Passport, the gas gauge always read empty, So i dropped the tank and tested the sending unit. The results i got were: Full=80ohms Empty=+200ohms

So i did some research and i believe the ohms should be between 0/1F-90-100E

So i ordered a "new" unit off Ebay and it too reads 80F -+200E..

My first thought was it too was a bad unit.. But then i read somewhere that there were to different units, one high ohm and one low ohm.

My questions are: are there two different units? If not, What should the Ohms be?

Thanks!!