Help! Isuzu LT134P no power to go uphill after changing gasket
Thread Starter
|
Junior Member
Joined: Jan 2019
Posts: 3
Help! Isuzu LT134P no power to go uphill after changing gasket
Hi, I am a new member here. I have a bus model LT134P with engine model 6HK1TC. Recently, I have overheated the engine. But after repairing by changing the gasket, my vehicle have no power to go uphill. And I noticed my RPM meter is not working perfectly( going opposite direction).
The mechanics have already tried their best but they still could not find a solution.
Things i I have spent lots of money on repairs:
1) Fuel pump
2) turbocharger
3) checking of piston, con rod, and piston rings
i am very desperate to find a solution and hopefully any experts here can help me out with my situation.
Would greatly appreciate it.
The mechanics have already tried their best but they still could not find a solution.
Things i I have spent lots of money on repairs:
1) Fuel pump
2) turbocharger
3) checking of piston, con rod, and piston rings
i am very desperate to find a solution and hopefully any experts here can help me out with my situation.
Would greatly appreciate it.
Junior Member
Joined: Feb 2019
Posts: 3
On my 92 I had a few years ago I had the same problem. I pulled the CAT and it was plugged up so put a straight pipe in place of it and ran great. I also advanced the timing on it and pulled the smog crap off and the truck came to life and pulled a 16ft trailer with a racecar on it every Saturday for 3 years before I bought a full size truck
Thread
Thread Starter
Forum
Replies
Last Post
Danny Ooi
IF Help & Suggestion Center
0
Jan 15, 2019 07:24 AM
VaBchRodeo
New Member Area
0
Oct 23, 2011 01:34 PM