1990 2.6 Pickup No Fire
 

Hello all, I am still trying to figure out what is wrong with my pickup. Replaced the coil, cap, and the rotor and still it just cranks. Had a local guy come and he said i have power at the coil and am getting plenty of fuel. He said more than likely the ICM or (power switch) was bad. I went to the parts store and picked up a new power switch. I took it off from under the manifold and made a ground wire for it as it needs a ground to work and still have no spark. It just cranks and cranks. Opened up the oil cap and had a buddy crank it and everything is turning like it should so that leads me to believe its not a broke timing chain. Short of trying a new distributor or ecm im at a loss. I cant find the ECM on this pickup either. Hoping someone here may have some more insight for me.

Can i ask a question?