General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here...

HELP!! Hood release not working!

Thread Tools
 
Search this Thread
 
  #1  
Old 04-09-2007, 03:57 PM
Trixie's Avatar
Junior Member
Thread Starter
Join Date: Apr 2007
Location: United States
Posts: 2
Default



The inside release lever isnt popping the hood...is there a way I can open it manually from the grill area?
 
  #2  
Old 04-19-2007, 02:50 AM
99amigo's Avatar
Junior Member
Join Date: Apr 2007
Location: United States
Posts: 3
Default



Sometimes the latch and cable get gummed up and won't release when you pull the release lever. Have you tried having somebody lifting the hood while you pull on the release lever. Sometimes I had to lightly tap onthe hood where the latch is with my fist while someone pulls on the release lever. When you get the hood open, make sure that you lube the latch and cable.


Scott





 
  #3  
Old 04-19-2007, 10:54 PM
NCISUZUTECH's Avatar
Member
Join Date: Apr 2007
Location: United States
Posts: 42
Default

Make sure to check your hood stops. They will turn themselves down [img]smileys/smiley15.gif[/img] with normal vibration and will not push up on the hood when you pull the release cable. The best way to check the adjustment is look at the hood and fender with the hood shut, they should be even [img]smileys/smiley10.gif[/img] . If the hood is lower it will cause your concern. To adjust, just turn the stops up slightly then recheck the alignment. This should allow the hood to release properly [img]smileys/smiley20.gif[/img] .
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
robkwil61
Rodeo
8
12-31-2019 07:38 PM
cdale_sam
Rodeo
1
02-14-2009 04:17 PM
tvone
Trooper
1
12-16-2007 10:21 PM
awnicol25
Private For Sale/Trade Classifieds
0
08-25-2006 11:03 AM
lukera
Rodeo
1
01-10-2006 07:26 PM



Quick Reply: HELP!! Hood release not working!



All times are GMT -5. The time now is 02:54 AM.