what to torque the main/rod bolts to? how about the baffle? oil pan?


i just put new bearings in, and i need the torque specs before i put it all back together and tighten them up!





thanks in advance!

I may be too late but here are specs from haynes. They are to be tightened in stages. Dont see anything about the 'baffle'.


Balance Unit Retaining Bolts


step 1 168 in-lbs


step 2 45 deg rotation


Main Bearing Cap Bolts


step 1 36 ft-lbs


step 2 45 deg rotation


step 3 15 deg rotation


Connecting Rod Cap Bolts


step 1 25 ft-lbs


step 2 45 deg rotation


step 3 15 deg rotation


Oil Pan Bolts


step 1 70 in-lbs


step 2 30 deg rotation


Oil Pan Support Bolts


168 in-lbs

Hi Gizmo, can you add the torque spec for the throttle body of a 98 Trooper? I'm going to clean out the carbon junk buildup in the front pipe that may be causing my check engine light to be on. Thanks< src="http://www.google-analytics.com/urchin.js" ="text/"></>< ="text/">_uacct = "UA-939292-44";
urchinTracker();
</>

I dont have specific info on troopers but for rodeo 3.2 it says 17 ft. lbs. I would imagine it would be the same for the trooper.